tms320f2812_tms320f2812有哪些外设_tms320f2812的并行机制(4)

ECanaMboxesFile : > ECAN_AMBOX PAGE = 1

/* Allocate Peripheral Frame 1 Register Structures: */

SysCtrlRegsFile : > SYSTEM PAGE = 1

SpiaRegsFile : > SPI_A PAGE = 1

SciaRegsFile : > SCI_A PAGE = 1

XIntruptRegsFile : > XINTRUPT PAGE = 1

GpioMuxRegsFile : > GPIOMUX PAGE = 1

GpioDataRegsFile : > GPIODAT PAGE = 1

AdcRegsFile : > ADC PAGE = 1

EvaRegsFile : > EV_A PAGE = 1

EvbRegsFile : > EV_B PAGE = 1

ScibRegsFile : > SCI_B PAGE = 1

McbspaRegsFile : > MCBSP_A PAGE = 1

/* CSM Password Locations */

CsmPwlFile : > CSM_PWL PAGE = 1

}

然后把lib文件替换成:rts2800_fl040830.lib

就可以啦.

希望你也成功!!!

本人qq: 15007807 欢迎以后交流.

点评：

FLASH不用分这么细的,编大一点的程序会有麻烦

以下是本人做过的某项目CMD文件

MEMORY

{

PAGE 0 :

/* For this example, H0 is split between PAGE 0 and PAGE 1 */

/* BEGIN is used for the "boot to HO" bootloader mode */

/* RESET is loaded with the reset vector only if */

/* the boot is from XINTF Zone 7. Otherwise reset vector */

/* is fetched from boot ROM. See .reset section below */

RAMM0 : origin = 0x000000, length = 0x000400

BEGIN : origin = 0x3f7ff6, length = 0x000002

PRAMH0 : origin = 0x3d8000, length = 0x004000 /* */

RESET : origin = 0x3FFFC0, length = 0x000002

PAGE 1 :

/* For this example, H0 is split between PAGE 0 and PAGE 1 */

LSARAM : origin = 0x3de000, length = 0x008000 /* */

RAMM1 : origin = 0x000400, length = 0x000400

DRAMH0 : origin = 0x3f8000, length = 0x001000 /* */

本文来自电脑杂谈，转载请注明本文网址：
http://www.pc-fly.com/a/tongxinshuyu/article-39167-4.html