V7000 硬盘状态显示已降级

你是否正在寻找关于v7000的内容？让我把最趣味的东西奉献给你：

724
Fewer Ethernet ports active.
Explanation
An Ethernet port that was previously operational is no longer operational. The physical link is down.
Data:
Three numeric values are listed:
The ID of the first unexpected inactive port. This is a decimal number.
The ports that are expected to be active. This is a hexadecimal number. Each bit position represents a port, with the least significant bit representing port 1. The bit is 1 if the port is expected to be active.
The ports that are actually active. This is a hexadecimal number. Each bit position represents a port, with the least significant bit representing port 1. The bit is 1 if the port is active.
User response
If possible, use the management GUI to run the recommended actions for the associated service error code.
Possibilities:
If the port has been intentionally disconnected, use the management GUI recommended action for the service error code and acknowledge the intended change.
Make sure the Ethernet cable is connected at both ends and is undamaged. If necessary, replace the cable.
Make sure the switch port or other device the cable is connected to is powered and enabled in a compatible mode. Rectify any issue. The device service interface might indicate the issue.
If this is a 10 Gb/s port, use the remove and replace procedures to replace the SFP transceiver in the Storwize® v7000 and the SFP transceiver in the connected switch or device.
Replace the node canister using the remove and replace procedures.
Possible Cause—FRUs or other cause:
Ethernet cable
Ethernet SFP transceiver
Node canister

以上就是关于v7000的全部内容，相信你一定会非常满意，。

本文来自电脑杂谈，转载请注明本文网址：
http://www.pc-fly.com/a/jisuanjixue/article-3935-1.html