三星galaxy tab2 p5100_三星galaxy tab2 p5100_三星galaxy tab2

三星 GALAXY TAB2 10.1 ROOT 教程（三星 Galaxy Tab2 10.1 根教程） Samsung GALAXY TAB2 10.1 ROOT tutorial (P5110/P5100/P5113/P3110) This tutorial has been turned from elsewhere, not my original. Someone has sent this tutorial before This tutorial is tried on the P5100 P5110 P5113 P3110... Brush ROOT when you need to clear your own model, do not brush ROOT bag randomly!!! Samsung Galaxy Tab 210.1 GT-P5113 (file in ZIP format, please do not decompress, complete file name is cwm-root-gtab2.zip) Samsung Galaxy Tab 210.1 GT-P5100 or GT-P5110 and Samsung Galaxy Tab 27 GT-P3110 (file in ZIP format, please do not decompress, complete file name is cwm-root-gtab2a.zip) The package has been packaged to my SkyDrive for direct download Note: when you brush the ROOT pack, P5100 will press the volume reduction button + the boot button to enter the Recovery recovery mode P3110 to press the volume key + boot button to enter the Recovery recovery mode In addition, undefined5100 press the volume reduction key + boot button, when Samsung LOGO, release the boot button, wait 2-3 seconds, release the volume reduction key, wait for about 15 seconds, enter the Recovery mode Other models are self tested, only P5100. (brush machine risk, brush before careful, any consequences I am not responsible for, including the successful or failure!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! The dividing line ----------------------------------------------------- split line First: brush Recovery recovery mode in detail tutorial 1. prepare and install the Samsung USB driver on your computer Or you can install Samsung Kies PC Sync (such as Kies_2.3.2.12054_20_1) 2. ready on the computer, apply to Samsung Galaxy Tab 210.1 or Samsung Galaxy Tab Clockworkmod Recovery 27 tablet computer recovery mode file recovery.tar file format, please unzip, complete file name for the recovery.tar file is not only suitable for Samsung Galaxy Tab 210.1 tablet computer, also applies to the Samsung Galaxy Tab 27 tablet computer 3. on the computer ready Samsung upgrade applications or tools Odin, unzip to the folder, note that the EXE format executable program file Odin3 v1.85.exe 4. on the computer has been unpacked in the Odin3 v1.85 directory or folder, double-click or otherwise run the Odin3 v1.85.exe program file, open Odin3 v1.85 program 5. turn off the device and disconnect the data line 6. press the volume key of the device without releasing the button, press the power button of the device to turn on, when the device screen shows a yellow triangle logo, (Note: the original author said that you need to continue pressing the volume key, but I'm here directly to the Download Mode, depending on the situation.) Press the volume of the device to reduce the key, according to the relevant prompts, the device enters the loading mode (Download Mode) 7. use the relevant USB data line to connect the device to the computer and make sure the computer correctly identifies your tablet device 在手机上请不要打开三星 Kies PC 同步程序（如果未开启了，请将其关闭） 8。

在电脑上已开启的 Odin3 v1.85 程序。 3。将网盘里下载的 cwm-root-gtab2 .zip 或者 cwm-root-gtab2a .zip复制到 SD 卡根目录（不是设备的内置内存）。

4。设备关机。 5。按住设备的音量减键不放开，按住设备的电池键关机，当仪器屏幕显示三星标志标示时，放开一直按住的电源键三星galaxy tab2 p5100，稍微等 2-3 秒放开音量减键等待约 15 秒左右设备（从 SD 扩展存储卡安装拉链格式文件）--选择从SD 卡拉链（从 SD 扩展存储卡选择拉链格式文件），然后选择并确定执行安装未从电脑上移动或复制至设备的 SD 扩展存储卡中的拉链格式的根内核文件 （请注意文件应与你的设备对应，不可以混淆） 7、三星 Galaxy Tab 2 10.1 或三星 Galaxy Tab 2 7 平板手机获得完全根权限过程完成 8。在设备的 ClockworkMod 恢复恢复机制主界面，选择并确定执行这次重新启动系统（现在重新启动系统） 9。设备重新启动完成 分割线-----------------------------------------------------分割线 最后：教程到此结束。谢谢你们的欣赏。 此教程来源于网络。

本文来自电脑杂谈，转载请注明本文网址：
https://www.pc-fly.com/a/shouji/article-139630-1.html