水池快速升温制冷机 品牌：九本牌

【水池快速升温制冷机】【水池快速冷却制冷机】【水池快速恒温制冷机】【水槽快速升温制冷机】【水槽快速恒温制冷机】：又叫冷水机、制冷机、冰水机、冷却机、冷冻机、冻水机、水循环制冷机、循环水冷却机，低温冷冻机、﹣40℃低温冷水机，环保型水制冷机等

▲Industrial water-cooled frozen water machine: also known as water chiller, chiller, ice water chiller, chiller, refrigerator, frozen water machine, water cycle refrigerator, circulating water chiller, low temperature refrigerator, - 40 ℃ low temperature water chiller, environmental friendly water chiller, etc

▲水池快速升温制冷机是一种通过蒸气压缩或吸收式循环达到空调效果的制热机器。这些固体还能流过高交换器到达对空气或仪器降温的目的。蒸汽压缩冷水机组包括四个主要组成部分的蒸气压缩式制冷循环（压缩机，蒸发器，冷凝器，部分计量装置的方式），这种机器可以推动不同的产业水循环制冷制冷机品牌，从而为客户推动低碳低碳的效果。

▲A water-cooled chiller is a refrigeration machine that achieves refrigeration through a steam compression or absorption cycle. These liquids can flow through the heat exchanger to the purpose of cooling air or equipment. The steam compression water chiller consists of four main components of the steam compression refrigeration cycle ( compressor, evaporator, condenser, part metering device ), this machine can realize the different industry water cycle refrigeration, so as to achieve the effect of environmental protection and energy saving for users.

水池快速升温制冷机产品简介：

▲本产品采取触摸式防水防潮控制面板，制冷温度3～30℃可调，接触器属日本施耐德、韩国LG系列，控制系统采用模块化设计，并装有系统进酸碱保护电压脱扣保护高低压保护及时间延时保护等多项保护装置，如有故障及时报案并显示告警。

▲This product is waterproof and dustproof touch control panel,cooling temperature 3～30℃ adjustable,schneider contactor is France, South Korea's LG series, the control system is modular in design and equipped with current overload protection system into high and low pH time delay protection and protection of a number of protective devices, if failure timely alarm and display fault.

▲本产品采取全新正品压缩机，属松下、谷轮、松下系列，使产品的能效比更高。冷凝器采用高效翅片式的设计，蒸发器采用高效内螺纹铜管水箱盘管式设计，能有效降低热效果,清洗也便于。

▲The imported product with a new compressor, is a sanyo,copeland,panasonic series, so that higher energy efficiency of products. finned condenser design of high-efficiency, high-efficiency evaporator coil inside the threaded brass tank design can effectively improve the thermal effect, but also easy to clean.

▲水泵精选意大利、台湾大流量高扬程水泵，使用安全超静，省电耐用。机体外壳用静电粉体涂料烤漆，美观大方。装有不锈钢水槽，清洗方便便捷。水箱内带有浮球自动补水装置，可用来检测并控制水量，从而有效地为用户节约时间并增加工作强度。

▲Pump selection Italy, Taiwan, high flow high head pumps, the use of security ultra-quiet, energy-saving durable electrostatic powder coating with the body shell paint, nice. Equipped with a stainless steel water tank, clean and convenient. Automatically fill the tank with float water plant, used to measure and control the water level, so as to effectively serve customers save time and improve efficiency.

▲非启停式的水缸快速升温制冷机其实是控制冷冻机内冷媒流向来控制空调循环水的浓度。按照冷冻机的生产原理，一共分为2种控制方法，在5度以内采用冷媒流向的控制方法，使冷冻机可以准确控制转速在正负0.1度，在5度以外采用压缩机启停方法，使冷冻机在不需要强烈制冷的状况下节电工作。 基于冷冻机的工作方式制冷机品牌，对于冷冻机的空调效率要求基本上可以满足(精度要求高的可以采取冷媒流向的控制方法)。 剩下来就是制冷电流和电机的选型规定了，只要考虑了详细的发热量，就可以选择不同制冷量的冷冻机，然后再看水箱的水泵和流量需求，选择不同的水箱。这样就可以找到适合的制冷机了。

▲Bring the start-stop type refrigerator freezer is actually the control of the refrigerant flow to control the temperature of the cooling circulating water。 According to the refrigerating machine manufacturing principle, total is divided into two kinds of control mode, within five degrees the refrigerant flow control mode, make the refrigerator can accurately control temperature in the plus or minus 0。1 degrees, in 5 degrees outside adopts compressor start-stop method, make the refrigerator under the condition of without strong refrigeration energy conservation work。

Based on the workings of a refrigerator, for freezer refrigeration accuracy requirement basically can satisfy (high accuracy requirement of refrigerant flow control mode) can be used。 Rest is the refrigeration power and pump selection requirements, as long as considering the specific heat, can choose different refrigerating capacity of refrigerating machine, and then look at the pump head and traffic demand, choose different pumps。 So you can find a suitable freezer。

设水池快速升温制冷机备优点：

▲风冷式设计，除采用箱型机组的所有性能外，无需加装冷却水塔和冷却水泵，安装简洁、操作便捷，可装整机调试在室内，节约生产场地及空间，可增加噪声，集中供应冷水，适用于中小型生产设施(此型号合适南方及缺水源的地区)大部分机型可同时带热回收，在提供冷源时可提供热能，适合用冷热需求的场所和制做用途。

▲Air-cooled design, with a box-type unit in addition to all the performance, but without the installation of cooling towers and cooling water pumps, installation is simple, easy to operate, the whole installation can be installed outdoors, saving space and production space, reduce noise, focus on supply cold water,suitable for small and medium sized production equipment(the model for the northern areas and water sources) most of the models at the same time with heat recovery, in the provision of the cold source to provide heat, hot and cold with the demand for places and processing purposes.

▲水池快速升温制冷机可分为①水冷式冷水机（设计箱型、柜式、开放式）②风冷式冷水机（设计箱型、柜式）风冷螺杆式冷水机组（箱型、柜式设计）③激光冷水机（箱型设计） ④电镀-氧化冷水机 ⑤反应釜冷水机⑥水冷螺杆式冷水机组（开放式设计）⑦镀膜机冷水机⑧低温型冷水机（-5- -40度）（箱型、柜式、开放式设计）⑨UV固化机、LED冷水机⑩超声波清洗专用冷水机

▲Industrial cold water machine can be divided into (1) water cooled chiller (design box, cabinet, open) (2) the air-cooled chiller (design box, cabinet), air cooled screw chiller (box, cabinet design) (3) cooling water machine for laser (box design) cold water machine (5) (4) plating - oxidation reaction kettle cold water machine 6 water cooled screw chiller (open design) 7) coating machine cold water machine of low temperature cold water machine (40 degrees - 5 -) (box, cabinet, open design) pet-name ruby UV curing machine, LED cold water machine attending special cold water ultrasonic cleaning machine

水池快速升温制冷机主要应用市场：

▲激光科技、焊接、塑料成形、注塑、挤塑、吹瓶、热力塑型、机械磨削加工、非切削加工、铸造、表面处理、电镀、电泳、医疗设施、电子市场、电路板生产、电子蕊片制造、化工、造纸、制药业、食品加工业、铝型材、铝合金、钢化玻璃、镀膜玻璃生产、超声波清冼、首饰加工、皮革、皮草加工、油墨制造、养殖业。

▲Laser technology, welding, plastic molding, injection molding, extrusion, blow bottle type, hot LiSu, mechanical machining, the machining, casting, surface treatment, electroplating, electrophoresis, medical equipment, electronics, circuit board production, electronic chip manufacturing, chemical industry, papermaking, pharmaceuticals, food processing, aluminum, aluminum alloy, toughened glass, coated glass production, ultrasonic erase, jewelry processing, leather and fur processing, printing ink production, aquaculture.

▲本公司所有设施已借助ISO9001：2008 idt GB/T19001-2008标准品质管控模式；CE认证；请安心选购

▲All the equipment of the company has passed IDT GB/T19001-2008 ISO9001:2008 standard quality management system certification; CE certification; please rest assured to buy.

本文来自电脑杂谈，转载请注明本文网址：
https://www.pc-fly.com/a/dianqi/article-119908-1.html