windows 7安装手册(光驱、USB、硬盘安装)（Windows 7 Installation Guide (CD-

windows 7 安装手册(光驱、USB、硬盘安装)（Windows 7 Installation Guide (CD-ROM, USB, hard disk installation)） windows 7 安装手册(光驱、USB、硬盘安装)（Windows 7 Installation Guide (CD-ROM, USB, hard disk installation)） For everyone introduced a very rich Windows 7 resources, followed by things, naturally, installation matters。 The general installation steps will not be introduced here。 Only the different installation methods of Windows 7 are introduced, including CD-ROM installation, USB device installation and hard disk installation。

Among them, the hard disk installation in front of a detailed introduction, here again introduced。 USB installation method and hard disk installation method are mainly introduced, because the two methods can solve the problem that the computer does not have DVD-ROM。 CD-ROM installation method Step1。 first needs to make sure your computer's CD driver can burn DVD, and then use burn tool to Windows 7 CD mirror image (can go to windows more than 7 version download, download) burn to disk。 If you have a ready Windows 7 system, the disk will be much simpler。

Use step2。 burning software to burn the windows 7 image, do not know how to burn friends can refer to Yesky "indows 7 Build 6956 DVD burning combat [photo]" Step3。 burn finished, I believe that in accordance with the prompt operation, generally there will be no problem! Two, USB installation method Step1。 opens the windows7 ISO image with UltraISO and then clicks start > writes to the hard disk image Step2。 hard disk drive U disk write mode, the default is USB-HDD+, can be changed to better USB-ZIP+ compatibility, and then click write (fruit from the U disk boot failure, you can try other ways of writing, such as the USB-ZIP) Step3。

wait a moment after writing is completed, you can restart, from the U disk to start installation of Windows7, the installation process and CD-ROM installation exactly the same。 (note note: this method is not suitable for the DVD CD-ROM friend, but is not all motherboard support USB startup, so please confirm this, please install Windows 7 before the system starts to USB start) A, Windows 7 system under the new installation of high version Windows7: 1, Download windows7 7600 ISO image (RC or RTM), the use of virtual CD-ROM load image and select all folders and files to the non C (such as D:\7600) 2。

Turn on the F8 - repair the system - select the last command to repair - enter "D:\7600\sources\setup。exe" (without quotes) in the command box 3, enter the installation interface, select the custom installation 4, select the installation language and format 5 and OK, installed is a pure system (non dual system)。 Two, if there is a vista installation disk, the method is also very simple: 1, Download windows7 7600 ISO image, using virtual CD-ROM load image and select all folders and files to the non C (such as D:\7600) 2, BIOS select CD-ROM drive, enter the vista installation interface 3, select the lower left corner to repair the computer (automatic search system, prompt loading, drive or shutdown, select shutdown, enter the repair option) 4。

Select the last command to fix, and start the installation in the command box, enter "D:\7600\sources\setup。exe" (without quotes) 5, select the installation language and format (even if C had no system this method is feasible) Three, hard disk start Not all computers are equipped with DVD ROM, which makes the computer installed on the win7, a problem。 You cannot install win7 from the drive,or you can use the U disk installation methodc boot bootsectexe, but the U disk installation is not supported by all the computers。

You can only use the hard disk drive method。 Prior to this, both XP and Vista could use the virtual drive to install system image installations directly。 But win7 doesn't support this approach, and hard disk installation is a bit of a hassle in the process。 After trying, the original hard disk installation is not too much trouble。 Computer does not have DVD drive friend, and want to try win7, might as well try! Three, XP system under the new installation of windows 7: 1, Download Windows 77600 ISO image, using virtual CD-ROM load image and select all folders and files to the non C (such as D:\7600) 2, the D:\7600 directory under the BOOTMGR and boot directory (in fact, as long as the inside of the boot。

The SDI and BCD files are copied to the root directory C), and built a sources folder in the root directory of C。 (XP does not require administrator privileges。) 3, copy the D:\7600\sources under boot。win to C, the newly built sources folder 4, run CMD with administrator status, and then enter c:\boot\bootsect。exe /nt60 c: prompt successful (the red letter section has two spaces, that is successful!) 5, close the CMD window, restart the computer, automatically enter the installation interface, select the installation language, and select the appropriate time and currency display categories and keyboard and input mode 6, "to start the installation interface", (note that, do not click "install now") at the lower left corner of the "computer repair" (repair mycomputer), enter the "system recovery options", select the last item "command prompt" (commandprompt), into the DOS window 7, enter "D:\7600\sources\setup。

本文来自电脑杂谈，转载请注明本文网址：
https://www.pc-fly.com/a/bofangqi/article-119535-1.html