wpa cli复制失败_wpa_cli_幻影1.75wpa cli驱动

wpa_cliwpa_cli

有密码模式

>add_network

>set_network 0 ssid '666'

>set_network 0 psk 'your pre-shared key'

>enable_network 0

>quit

root@dpdk2-All-Series:~# dhclient wlan1

4.命令手册 Full command

Short command

Description

status

stat

displays the current connection status

disconnect

disc

prevents wpa_supplicant from connecting to any access point

quit

q

exits wpa_cli

terminate

term

kills wpa_supplicant

reconfigure

recon

reloads wpa_supplicant with the configuration file supplied (-cparameter)

scan

scan

scans for available access points (only scans it, doesn‘t displayanything)

scan_result

scan_r

displays the results of the last scan

list_networks

list_n

displays a list of configured networks and their status (active ornot, enabled or disabled)

select_network

select_n

select a network among those defined to initiate a connection (ieselect_network 0)

enable_network

enable_n

makes a configured network available for selection (ieenable_network 0)

disable_network

disable_n

makes a configured network unavailable for selection (iedisable_network 0)

remove_network

remove_n

removes a network and its configuration from the list (ieremove_network 0)

add_network

add_n

adds a new network to the list. Its id will be createdautomatically

set_network

set_n

shows a very short list of available options to configure a networkwhen supplied with no parameters.

See next section for a list of extremely useful parameters to beused with set_network and get_network.

get_network

get_n

displays the required parameter for the specified network. See nextsection for a list of parameters

save_config

save_c

saves the configuration

本文来自电脑杂谈，转载请注明本文网址：
http://www.pc-fly.com/a/tongxinshuyu/article-34129-1.html