wpa cli复制失败_wpa_cli_wifi下载(2)

>set_network 1 ssid “666”

>set_network 1 key_mgmt NONE

>set_network 1 wep_key0 “your ap passwork”(if usting ASCII, it need double quotation marks, if using hex, then don`t need the double quotation marks)

>set_network 1 wep_tx_keyidx 0

>select_network 1 (optional, remember, if you are connecting with another AP, you should select it to disable the another)

>enable_network 1

and then ,get an IP to access internet

for AP that has WPA-PSK/WPA2-PSK

>add_network (assume returns 2)

>set_network 2 ssid “666”

>set_network 2 psk “your pre-shared key”

>select_network 2 (optional, remember, if you are connecting with another AP, you should select it to disable the another)

>enable_network 2

there is still some others options to be set, but wpa_supplicant will choose the default for you, the default will include all we need to set and then ,get an IP to access internet

命令执行后，wpa_cli 会输出连接的过程信息。如果一切正确，则最后后输出：

<2>CTRL-EVENT-CONNECTED - Connection to xx:xx:xx:xx:xx:xx completed (reauth) [id=0 id_str=]

获取IP地址

用 quit

命令退出wpa_cli 。wpa_cliwpa_cli然后用

dhclient wlan0

命令获取IP地址。

本文来自电脑杂谈，转载请注明本文网址：
http://www.pc-fly.com/a/tongxinshuyu/article-34128-2.html