添加网络printer_batch文件

注意: ①默认情况下打印机共享bat，可以通过执行add_printer.bat文件来添加打印机.

②如果在操作过程中提示端口添加错误，请先接收add_port.red文件，然后执行add_printer.bat文件.

1. 添加用于添加打印机的TCP / IP端口，文件名: add_port.reg

 1 Windows Registry Editor Version 5.00
 2 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\Standard TCP/IP Port\Ports]
 3 "StatusUpdateInterval"=dword:0000000a
 4 "StatusUpdateEnabled"=dword:00000001
 5 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\Standard TCP/IP Port\Ports\IP_192.168.6.245]
 6 "Protocol"=dword:00000002
 7 "Version"=dword:00000002
 8 "HostName"="192.168.6.245"
 9 "IPAddress"=""
10 "HWAddress"=""
11 "PortNumber"=dword:00000203
12 "SNMP Community"="public"
13 "SNMP Enabled"=dword:00000001
14 "SNMP Index"=dword:00000001
15 "PortMonMibPortIndex"=dword:00000001
16 "Queue"="print"
17 "Double Spool"=dword:00000000
18 [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Monitors\Standard TCP/IP Port\Ports]
19 "StatusUpdateInterval"=dword:0000000a
20 "StatusUpdateEnabled"=dword:00000001
21 [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Monitors\Standard TCP/IP Port\Ports\IP_192.168.6.245]
22 "Protocol"=dword:00000002
23 "Version"=dword:00000002
24 "HostName"="192.168.6.245"
25 "IPAddress"=""
26 "HWAddress"=""
27 "PortNumber"=dword:00000203
28 "SNMP Community"="public"
29 "SNMP Enabled"=dword:00000001
30 "SNMP Index"=dword:00000001
31 "PortMonMibPortIndex"=dword:00000001
32 "Queue"="print"
33 "Double Spool"=dword:00000000

注意: 仅需要修改（5、8、21、24，）行中的IP地址，此IP地址是网络打印机的IP地址，打印机应设置为静态IP地址.

2. 添加打印机打印机共享bat，文件名: add_printer.bat

本文来自电脑杂谈，转载请注明本文网址：
http://www.pc-fly.com/a/shumachanpin/article-216466-1.html