上海浦西虹口区索尼牌数码相机镜头打不开维修（Shanghai Puxi Hongkou District SONY di(4)

However, because of the simplicity of the memory card, the memory card is often damaged by the user's careless use and processing。The first principle of protecting a memory card is to always install and remove the memory card only when the digital camera has been turned off。 Users often mistake is rushing to storage card removed from the camera, although the power supply has been shut down, but some of the camera storage speed is slow, or is drawing great to spend a longer period of time, the camera may appear to have stopped, but in fact, the storage action continues, then to half the archives destroyed does not say, but also may cause permanent damage to the storage card。

Therefore, it is recommended that you turn off the camera and wait for a moment or notice the camera's lights go out completely before you remove the memory card。Secondly, do not usually format the memory card at will。 When you use your camera to format the memory card, pay attention to whether the camera has enough power。 When you use the computer to format the memory card, pay attention to choose the correct format。 If you use an operating system such as Windows and XP, you need to be aware that the default FAT32 format is incorrect when the system is formatted, and that a general digital camera uses the FAT format。

At the same time, attention should be paid to avoid the use of high temperature and high humidity storage cards and storage cards do not put in high temperatures and direct sunlight。 Avoid physical damage such as heavy pressure, bending, falling, impact, etc。, keep away from static, magnetic, liquid and corrosive substances。 When the memory card is removed,Avoid storage media that touch the memory card。 If used for a long time, the contact point of the memory card slot is dirty, cause the fault memory and read the information, you can use compressed air to blow, and do not use small sticks stuck rub, or it may cause a bigger problem。

Lens fault:Black screen, aperture card dead, no change, lens moldy, lens man-made damage, lens water, sand, focusing error, shutter not open。 CCD fault:Caused by black screen, flower screen, the screen stripe, splash, image missing color, ribbons and so on。LCD fault:LCD damage caused by black screen, flower screen, dark screen, white screen, lack of color and so on, man-made damage。Boot circuit:Not boot, unable to complete the boot, normal boot, but can not operate properly。The typical fault phenomenon: the camera lens is not water, shrinkage, flash light, the camera does not boot, E18 error, system error, the camera automatically shut down and press the shutter release button when not shooting, the camera viewfinder, Huaping black button failure, memory card, camera camera can recognize the old prompt replacement of batteries, power consumption, just the photos not on the LCD screenAppear on the LCD screen, blurred and white screen, the screen cracked, excessive exposure, camera connected to the computer to send data to the computer when error messages, LCD display images have obvious flaws or black, the computer cannot download photos and so on normal condition。

Peripheral accessories sales: to provide all types of digital cameras, cameras, data lines (USB 1394), reader, battery, charger, DV band, camera memory card: SD, CF, XD, MMC, etc。。 Camera camera fault simple self judgment, before the repair, first of all want to know what type of machine you want to repair, what is the problem? The following is a list of several common fault fault fault 1, the majority of the camera lens is a lens fault, because this is a mechanical part, easily affected by external impact, when a foreign body (sand) into the lens will cause the lens fault。

Several fault lens (1) lens can not flex (2) lens error (CASIO machine) (3) error lens cap (Nikon S Series) (4) (Nikon lens error machine) (5) (Fuji zoom error for some types of machines)。 (6) please power off and restart (SONY cameras) (7), E45 (Kodak camera error the camera lens error code) (8) focusing error (Fuji some old machines, such as the F420 prompt)。 (9) lens error, please restart the camera (Canon new models such as A640, ixus850 and SONY (10)。 The two camera code, E:61:00 failed to initialize E:61:10 zoom focus initialization failed。

(11) suggest that the E18 error (E18 error code is Canon camera lens, prompt reason, wrong E18 most lens is broken, a gear transmission problem, there is a mirror lens group)2。 The camera is a kind of electronic equipment, so it conforms to the general rule of the malfunction of the electronic equipment。 If your machine cannot boot, please check your battery first。 This will be tested by replacement。 1, some cameras have power on test procedures,Such as SONY, CASIO, Pentax, Fuji and other brands of cameras, mounted on the battery indicator is flashing。

2。 does the camera make noise or the lens has a transmission?。3, first determine whether normal black viewfinder display, there is no boot screen, close the lens to the light flash, a camera movement, if you do not see the shutter, the shutter is broken, as there is generally a motherboard failure。 Note: field maintenance refers to the digital camera camera only on-site maintenance maintenance。 For the screen, screen for cable, 1394 for this kind of simple interface fault identification and charging standards of repair。

本文来自电脑杂谈，转载请注明本文网址：
http://www.pc-fly.com/a/shumachanpin/article-117537-4.html